Metric system

From English Wiki
Revision as of 13:01, 29 October 2022 by Kentlee7 (talk | contribs) (Created page with "The metric system is an international system of measurement that was first introduced in France in the 1790s, and has since undergone revision. In the mid-20th century, it was...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The metric system is an international system of measurement that was first introduced in France in the 1790s, and has since undergone revision. In the mid-20th century, it was standardized by an international standards body, and became officially known by the French abbreviation SI (System International), or the International System of Units.

The metric system is built around the basic units of the meter, liter, gram, Kelvin (for temperature) and a few other core units. The system is based on several core principles. The units are based on natural, physical, and scientific principles, that is, they are defined precisely and scientifically based on scientific phenomena in the natural world that can always be measured consistently. This stands in contrast to older systems like the imperial system used in the US, consisting of units like inches, miles, and gallons, which are arbitrary and not defined by natural principles. Another principle of the metric system is that the units are related to each other consistently, and they are coherent, that is, based on natural orders of magnitude, or factors of ten (e.g., 1 meter = 100 centimeters, 1 centimeter = 10 millimeters), and this is expressed with regular prefixes (e.g., centi-, milli-).

This system serves as the official system of weights and measures internationally, except in Myanmar, Liberia, and the United States.


1 Base units and derived units

The following are the base units of the metric system and their formal scientific definitions.[1]

SI base units
Unit name Symbol Dimension Definition
second s time (T) The duration of 9192631770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium-133 atom.
meter m length (L) The distance travelled by light in a vacuum in 1/299792458 seconds.
kilogram kg mass (M) The kilogram is defined by setting the Planck constant h exactly to 6.62607015×10−34 J⋅s (J = kg⋅m2⋅s−2), given the definitions of the metre and the second.
ampere A electric current (I) The flow of exactly 1/1.602176634×10−19 times the elementary charge e per second, equalling approximately 6.2415090744×1018 elementary charges per second.
kelvin K thermodynamic temperature (Θ) The kelvin is defined by setting the fixed numerical value of the Boltzmann constant k to 1.380649×10−23 J⋅K−1, (J = kg⋅m2⋅s−2), given the definition of the kilogram, the meter, and the second.
mole mol amount of substance (N)) The amount of substance of exactly 6.02214076×1023 elementary entities. This number is the fixed numerical value of the Avogadro constant, NA, when expressed in the unit mol−1.
candela cd luminous intensity (J) The luminous intensity, in a given direction, of a source that emits monochromatic radiation of frequency 5.4×1014 hertz and that has a radiant intensity in that direction of 1/683 watt per steradian.


1.1 Derived units

The following units are commonly used derived units, often formed from combinations of base units.


SI derived units with special names and symbols
Name Symbol Quantity In SI base units In other SI units
radian[N 1] rad plane angle m/m 1
steradian[N 1] sr solid angle m2/m2 1
hertz Hz frequency s−1
newton N force, weight kg⋅m⋅s−2
pascal Pa stress kg⋅m−1⋅s−2 N/m2
joule J work, heat kg⋅m2⋅s−2 N⋅m = Pa⋅m3
watt W power, radiant flux kg⋅m2⋅s−3 J/s
coulomb C electric charge s⋅A
volt V emf kg⋅m2⋅s−3⋅A−1 W/A = J/C
farad F capacitance kg−1⋅m−2⋅s4⋅A2 C/V = C2/J
ohm Ω resistance, electrical impedance|impedance, Reactance (electronics)|reactance kg⋅m2⋅s−3⋅A−2 V/A = J⋅s/C2
siemens S electrical conductance kg−1⋅m−2⋅s3⋅A2 Ω−1
weber Wb magnetic flux kg⋅m2⋅s−2⋅A−1 V⋅s
tesla T magnetic flux density kg⋅s−2⋅A−1 Wb/m2
henry H inductance kg⋅m2⋅s−2⋅A−2 Wb/A
degree Celsius °C or ℃ temperature relative to 273.15 K K
lumen lm luminous flux cd⋅sr cd⋅sr
lux lx illuminance cd⋅sr⋅m−2 lm/m2
becquerel Bq activity referred to a radionuclide (decays per unit time) s−1
gray Gy absorbed dose (of ionising radiation) m2⋅s−2 J/kg
sievert Sv equivalent dose (of ionising radiation) m2⋅s−2 J/kg
katal kat catalytic activity mol⋅s−1
Notes
  1. 1.0 1.1 The radian and steradian are defined as dimensionless derived units.
  1. The information in these tables is compiled from various Wikipedia pages for your convenience.